Window replacement and Installation in Toronto, Ontario

There are some obvious signs that indicate you had better replace your windows.

• There is visible damage such as spalling or decay.
• Mold or mildew inside the windows.
• Feeling cold in winter.
• You hear outside noises very loudly.
• You feel drafts coming in around the window or floor.
• Your carpets or even furniture start to fade, probably because the UV rays are no longer kept out by the old windows.
• In most cases, it is difficult to open or close the windows.

Most likely, a small shard on the window does not mean that you need to start looking for a Toronto windows replacement company. However, if you notice more and more signs, you better think about Toronto window replacement.

Yes, it is a normal situation. Especially in old windows that are constantly used, air and water leaks occur over time. But even expensive and high-quality windows let some water through. This is due to the construction of the windows – they are equipped with drainage holes, through which the water inside can drain away. Regardless of how well the windows are constructed, a functional window will inevitably retain some water after a heavy rain or as a result of heavy condensation. The difference between bad and good windows is that the bad windows let the water inside the house, while well-designed windows direct the water away from the wall.

Condensation on windows occurs for a variety of reasons, most commonly due to moisture in the air and temperature fluctuations. Even things as simple as breathing or showering will cause condensation to appear on your windows. This happens most often with inferior models of windows. Any activity at home can lead to an increase in humidity, especially if it is done on a daily basis: Washing clothes, washing dishes, cooking or cleaning the floor or excessive use of air conditioning.

Without going into the physics, condensation on windows can cause frost to form on windows in cold weather. And the frost causes damage. If it’s a wood window, the constantly melting frost can discolor the paint or cause cracks in the paint. In the worst case, the wood will be damaged.
Secondly, additional moisture inside the window will cause mold to grow inside the window.

As a rule, this happens to windows of poor quality or with great age. High quality models do not condense due to their condensation resistant construction and internal thermal insulation chambers. If you notice condensation on your windows, it’s probably a sign that you should replace them, as mold or mildew can form inside the windows over time.

The simplest method is to replace the windows with newer models. Otherwise, you can try to control humidity by providing higher air movement in the window. Such a system would help speed up the air movement and prevent moisture from accumulating in the window.
You should know that you can reduce condensation by lowering the humidity. As a rule, a decrease in outdoor temperature ensures that the humidity level also decreases.
So, as a first step, determine the level of humidity in the air. This requires regular monitoring, as the temperature outside the house is constantly changing. The best device to measure humidity is a hygrometer. Here is a table that will help you determine the degree of humidity:

We operate in hugest cities of Ontario – Toronto, Brampton, Concord, Etobicoke, King City, North York, Thornhill, Woodbridge. We are proud to bring only the best in window installation and products to Toronto and its surrounding areas.